Barco HDF-W30LP, Руководство пользователя и инструкция по установке

Страница: 126 / 311

13. Input
3. Use the ▲ or ▼ key to select Create .
Press ENTER to open the creation menu.
4. Fill out the Timings section.
Use the ▲ or ▼ key to select a setting.
Use the ◄ or ► key to change the value
or press ENTER to open the speci fi c adjustment menu. Follow the adjustment method as described in "Navigation and adjust-
ments", page 106.
The following timings must be entered:
-
Active Pixels : horizontal resolution
- Active Lines : vertical resolution
- Frequency (Hz): amount of frames per second
5. Select the calculation method to obtain the correct (standard) video timings.
Possible selections:
-
CVT : Coordinated Video Timings
- CVT RB : Coordinated Video Timings Reduced Blanking
- CVT MB : Coordinated Video Timings Minimum Blanking (not a standard)
- GTF : Generalized Timing Formula
6. Select the Options .
If necessary, scroll down to see extra options.
Select or clear the check boxes.
Image 13-27
EDID
fi le creation, options
The following options are possible:
-
Stereo : this check box is currently not in use. You can leave it unchecked.
- Deep color : select this box in case of a 12 bit color signal. In this case, the Single Link pins of the DVI connector convey the
eight most signi fi cant bits, while the Dual Link pins convey the four least signi fi cant bits.
- Analog: this check box makes the selection between DVI digital or DVI analog. When checked, DVI analog is active.
7. A fi lename is proposed. This proposed name contains the resolution, calculation, frequency and a D or A for digital or analog.
To change the fi le name, select Filename and press ENTER to open the edit box.
Click inside the edit box and change the name to the desired name.
8. Select Create and press ENTER to create the new custom fi le.
13.9.3 Delete a custom EDID fi le
Standard EDID fi les cannot be deleted.
How to delete
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Input → EDID → Delete .
2. Press ENTER to open the EDID list with custom fi les.
122 R5906730 HDF WLP SERIES 01/08/2017