Barco HDF-W30LP, Руководство пользователя и инструкция по установке

Страница: 125 / 311

13. Input
Image 13-22
EDID, con
fi gure
Image 13-23
EDID con
fi guration
Image 13-24
EDID selection list
3. Use the ▲ or ▼ key to select the input to con fi gure.
Press ENTER to open the selection list.
The current active fi le is checked.
4. Use the ▲ or ▼ key to select the correct fi le.
Press ENTER to select this fi le.
Press EXIT to return to the EDID Con fi guration menu.
5. Use the ▲ or ▼ key to select Apply .
Your selection is applied and stored for this input.
The EDID Con fi guration menu remains open to con fi gure another input.
Or,
use the
▲ or ▼ key to select OK .
Your selection is applied and stored for this input and the EDID con fi guration menu is closed.
13.9.2 Create custom EDID fi le
Description
You can create new custom EDID fi les and enter the desired input timings.
How to create
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Input → EDID → Create .
2. Press ENTER to open the EDID creation menu.
Image 13-25
EDID, create
Image 13-26
EDID
fi le creation
R5906730 HDF WLP SERIES 01/08/2017 121