Barco HDF W series, Инструкция по использованию и установке

Страница: 155 / 319

11. Lamp
Image 11-24
LPS power
11.10 Lamp identi fi cation
About
The lamp identi fi cation menu gives an overview of the most important parameters of the used lamp.
These parameters are:
•
Serial number of the lamp
• Article number of the lamp
• Run time since fi rst start up of the lamp
• Remaining run time for a safe operation of the lamp
• Number of strikes since the fi rst start up of the lamp
• Software version
These parameters are useful in case of a service request.
How to display
Press Menu to activate the menus and select Lamp → Identi fi cation .
Image 11-25
Main menu, lamp Image 11-26
Lamp, identi
fi cation
Press ENTER to select.
Image 11-27
Lamp identi
fi cation
11.11 Z-axis adjustment
What can be done?
The Z-Axis menu item gives the current light output of the projector (in percentage). This light output indication can be used to
readjust the lamp position in the lamp casing (also called Z-axis adjustment of the lamp). With higher run times, the light output
of the lamp will decrease, which results in a lower light output on the screen. This light output decrease can be compensated by
readjusting the position of the lamp. This realignment has to be done by a quali
fi ed service technician.
How to display the light output
Press Menu to activate the menus and select Lamp → Z-axis .
Image 11-28
Main menu, lamp Image 11-29
Lamp, Z-axis
Press ENTER to display the current light output.
R5905158 HDF SERIES 16/06/2015 151