Barco Graphics 908, Руководство пользователя

Страница: 76 / 111

7. Service Mode
The Identification screen will be displayed.
BARCO
REALITY 908
Proj. address: 001
Soft. Version: 2.11
Config.: Ceiling
Front
Baudrate PC: 9600
Text: ON
Serial No.: 1035895
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-5
2. Press EXIT to return to the Projector Set-Up menu.
7.3.3 Total Run Time
What can be seen?
The total system run time since the first start up can be displayed plus the run time of the separate CRT’s since the last reset.
All projectors leave the factory after a burn-in period of approximately 100 hours.
How to start up Total Run Time?
1. Push the ↑ or ↓ keys to highlight Total Run Time and press ENTER to select.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
PROJECTOR WARM UP
POWER UP MODE: operating
COMMON ADDRESS: 0
ABL CONTROLLER
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-6
The Total Run Time screen will be displayed, the System Runtime indicates the amount of time the projector has played since its
first start up at the factory, the CRT run times will be displayed next to the respective colors.
RUN TIME
SYSTEM RUNTIME: 120 h
CRT RUNTIME
RED: 20 h
GREEN: 20 h
BLUE: 50 h
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-7
How to reset CRT Run Time?
1. Push the ↑ or ↓ keys to highlight the desired CRT e.g. Red, for which the Run Time has to be reseted.
RUN TIME
SYSTEM RUNTIME: 120 h
CRT RUNTIME
RED: 20 h
GREEN: 20 h
BLUE: 50 h
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-8
72 R5976633 BARCO GRAPHICS 908 / BARCO REALITY 908 05/06/2003