Barco Graphics 908, Руководство пользователя

Страница: 67 / 111

6. Random Access Adjustment Mode
7. Repeat the same procedure for Red on Green and Blue on Green.
8. Press EXIT to return to the Random Access Adjustment Mode menu.
6.6.3 Fine Convergence Adjustment
What can be done?
The Convergence for ’Green only’, if available, and ’Red on Green’ and ’Blue on Green’ can be adjusted in 81 areas without any
influence for another area.
How to perform a Fine Convergence Adjustment?
1. Push the ↑ or ↓ keys to highlight Green Only within the Fine Convergence Adjustment and press ENTER to select.
CONVERGENCE
COARSE ADJUSTMENT
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
BLUE ON RED
FINE ADJUSTMENT
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
BLUE ON RED
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-63
The Convergence Selection menu will be displayed and the screen will be divided in 81 areas.
2. Use the cursor keys to select one of the 81 areas and press ENTER to confirm and to toggle the cursor keys to the adjustment
mode.
1
2
3
4
5
6
7
8
9
1 2 3 4 5 6 7 8 9
Image 6-37
81 Fine Convergence Areas
3. Use the cursor keys to make horizontal or vertical adjustments in the selected area.
4. Press ENTER to finish convergence adjustment and to toggle the cursor keys to the selection mode.
5. Repeat step 2 till 4 for each area that needs an adjustment
6. Press EXIT to return to the Convergence menu when the convergence for that item is finished.
7. Repeat the same procedure for Red on Green and Blue on Green.
8. Press EXIT to return to the Random Access Adjustment Mode menu.
R5976633 BARCO GRAPHICS 908 / BARCO REALITY 908 05/06/2003 63