Barco Galaxy NW-7, Руководство пользователя

Страница: 151 / 220

7. Advanced
Fine tuning colors
If the color impression amongst different devices in a multiple channel display system is slightly different, you can manually fi ne
tune the desired X and Y value of the white point in the active Dynacolor set to match the colors. Always keep the CIE chromaticity
diagram in mind while changing the white point position:
• Increasing the desired X value of the white point makes the image look more reddish;
• Decreasing the desired X value of the white point makes the image look more cyanish;
• Increasing the desired Y value of the white point makes the image look more greenish;
• Decreasing the desired Y value of the white point makes the image look more magenta-ish;
• Etcetera.
x
y
0 0.4 0.2 0.6 0.8
0
0.4
0.8
0.6
0.2
G
B
R
W
Image 7-167
Moving the desired white point
C
AUTION
:
Color fi ne tuning may only be done by Barco trained and quali fi ed engineers.
Fine tuning the color of the projected image
1. In the OSD, navigate to the active Dynacolor set: Display setup > Dynacolor > or Adjust Set 1... > Adjust Set 2... or Adjust In fi tec
A... or Adjust In fi tec B...
2. Press ENTER to con fi rm your selection.
R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013 147