Barco Galaxy NW-7, Руководство пользователя

Страница: 146 / 220

7. Advanced
Image 7-161
7.9.7.2 Choosing DynaColor sets
Choosing DynaColor set can be done by the operator.
Overview of Dynacolor sets
Depending on the projector settings, different Dynacolor sets are enabled and/or available:
•
Monoscopic mode: two Dynacolor sets ( Set 1 and Set 2 ) can be selected and adjusted;
• Active stereo mode: two Dynacolor sets ( Set 1 and Set 2 ) can be selected and adjusted;
• Active In fi tec stereo mode: two Dynacolor sets ( In fi tec A and In fi tec B ) can be adjusted. Set A is used for the left-eye images,
while Set B is used for the right-eye images. These sets are automatically selected when the In fi tec fi lter moves into the projector
light path;
• Passive In fi tec stereo mode: one Dynacolor set ( In fi tec A or In fi tec B, depending on the In fi tec fi lter in the projector ) can
be adjusted. This set is automatically selected when the In fi tec fi lter moves into the projector light path.
In the following procedures we will only explain the selection of Set 1 . The same procedure applies for Set 2 .
142 R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013