Barco Galaxy NH-12, Руководство по установке опций, Страница: 25 / 35

A. Backup and restore data
C
AUTION
:
It is not allowed to do any manual change to a backup fi le. A changed fi le cannot be restored!
A.3 Restoring a set of key data
C
AUTION
:
If a backup fi le has been manually changed, it will no longer be possible to restore it in the pro-
jector!
Different levels of restore
Different situations lead to different levels of restore:
• restore data to a used PMP which already holds data and settings
• restore data to a new PMP which has no data and settings yet
When restoring to a new PMP, the Projector Support tool automatically manages the full restore. This means that the operator can
not interact. The serial number and history are restored as well.
When restoring to a used PMP, a selection of the fi les to be restored can be made. The Projector Support tool however manages
the fi les which are critical:
• serial number, runtimes, etc. will not be overwritten
• option keys will not be blanked or overwritten
• some fi les will be merged: newly added data (e.g. custom geometry fi les) will not be lost
• some settings (e.g. automatic shutdown, warning messages ON/OFF) will not be overwritten
• etc.
How to restore the key data in a used PMP?
It is assumed that communication with the projector has been established through Projector Support and that an original backup fi le
is available (zip format).
1. In the
Restore section of the Projector Support tool user interface, hit Browse
Image A-14
Projector Support tool: browse to the folder with the backup
fi le
2. Browse to the folder on the computer where the backup fi le is stored
3. Select the backup fi le and hit Open
R59770498 PMP KIT 28/02/2011 21