Barco G62, Руководство пользователя

Страница: 46 / 124

R5914653 /02 G62 46
• Due to Resolution/Color space/ Horizontal Refresh difference between two input sources, in some case,
auto switch and resync may take seconds from HDMI1 to HDMI2 when HDMI1 signal is lost.
HDMI
Setup the projector’s HDMI ports.
• Output : Select a HDMI port to output the signal.
• EDID : When receiving a HDMI signal, set the projector’s EDID compatibility to display the signal correctly.
Select 1.4 for the input devices with HDMI 1.4, or 2.0 for HDMI 2.0 devices.
Auto Signal Resync
Once enabled, the system will automatically synchronize the projector to the recent connected input source
every time you switch the input source.
7.6 Edge Mask
About edge mask
The edge blending function allows you to hide one or multiple edges of the projected image. You can use this
function to remove the video encoding noise on the edges of the video images.
7.7 Geometry Correction
About geometry correction
Configure the geometry settings to reshape the image for different projection surface.
Warp control
Configure warp settings.
• Basic : Configure basic settings, such as keystone, pincushion, and 4-corner.
• Advanced : Configure advanced settings, such as grid points, warp inner, warp sharpness, and more.
Basic Warp
Configure basic warp settings.
• Keystone: Keystone function is used to adjust the images in asymmetric rectangle shape.
- H. Keystone : Adjust the left and right side of the projected image to make it an even rectangle. It is
used for the images with unequal left and right sides.
Image 7–6
- V. Keystone : Adjust the top and bottom side of the projected image to make it an even rectangle. It is
used for the images with unequal top and bottom sides.
User controls — Installation