background image

R5910888 /00

G60

14

Light beam related safety labels for G60-W8 series

Label image

Label description

R G 2

R G 2

Risk Group 2, IEC60825-1:2014. Do not look into the laser light. The
extremely high brightness may cause permanent eye damage.

This product complies with performance standards for laser 

products under 21 CFR Part 1040 except with respect to those 

characteristics authorized by Variance Number XXXX-X-XXXX 

effective [insert the date of the variance approval]

BARCO INC 

3059 Premiere Parkway Suite 400, Duluth, GA 30097, USA

U.S.A. Only

FDA laser variance (US projectors only)

This product is classified as Class 1 Laser Product-Risk Group 2 of
IEC 60825-1:2014 and also complies with 21 CFR 1040.10 and
1040.11 as a Risk Group 2, LIP ( Laser Illuminated Projector) as
defined in IEC 62471:2006 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.

Warning! Do not look into the beam. No direct eye exposure to the beam 
is permitted. Not for household use.
RG3 Hazard Distance: Refer to the manual.

Avertissement! Ne regardez pas à l'intérieur du faisceau. L'exposition 
directe des yeux au faisceau est interdite. 
RG3 Distance à risque: Consultez le manuel.

 

 

 

 

 

 

 

 

. R G 3 

 

 

IEC60825-1:2014 Class 1 Laser Product Risk Group 3

This projector may become Class 1 Laser Product-Risk Group 3 of
IEC 60825-1:2014 when installed with G lens - Ultra Long Zoom
(throw ratio 2.90 - 5.50 : 1).

Light beam related safety labels for G60-W10 series

Label image

Label description

This product complies with performance standards for laser 

products under 21 CFR Part 1040 except with respect to those 

characteristics authorized by Variance Number XXXX-X-XXXX 

effective [insert the date of the variance approval]

BARCO INC 

3059 Premiere Parkway Suite 400, Duluth, GA 30097, USA

U.S.A. Only

FDA laser variance (US projectors only)

This product is classified as Class 1 Laser Product-Risk Group 2 of
IEC/EN 60825-1:2014 and Class 3R Laser product of IEC/EN
60825-1:2007, complying with 21 CFR 1040.10 and 1040.11 except
for deviations pursuant to Laser Notice No.50, dated June 24, 2007.

This projector may become Risk Group 3 product when an
interchangeable lens with throw ratio greater than 2.9 (G lens - Ultra
Long Zoom) is installed. Refer to the manual for the lens list and
hazard distance before operation. Such combinations of projector
and lens are intended for professional use only, and are not intended
for consumer use.
Not for household use.
No direct exposure to beam shall be permitted, which can cause
injury to the retina in the back of the eye.

Safety

Содержание G60 Series

































































Отзывы: