Barco G50, Руководство пользователя

Страница: 54 / 180

R5916676 /00 G50 54
8.6 Advanced Settings
About advanced color
Configure advanced color settings to improve the color performance.
Realcolor P7
Change the color of a projected image by adjusting each color component in the image. The adjustable color
includes Red, Green, Blue, Cyan, Yellow, and Magenta (R / G / B / C / Y / M).
Image 8–2
• Auto Test Pattern: Enable the function to view a specific color pattern while adjusting.
• R / G / B / C / M / Y: Select a color for further adjustment.
• Hue: Adjust the hue of the selected color. The value reflect the number of degrees of rotation around the
chromaticity diagram from the original color. Increasing value indicates counterclockwise rotation, and
decreasing value, clockwise rotation.
• Saturation: Adjust the saturation of the selected color. The value indicates the color shifts from or towards
the white in the center of the chromaticity diagram.
• Gain: Adjust the gain of the selected color. Increase the value to brighten the image (add white to a color)
or decrease the value to darken the image (add black to a color).
• Reset: Reset the function settings to factory default values.
HDR
Configure the settings for the High Dynamic Range (HDR) function.
• HDR
- Off: Turn off the projector’s HDR function, and the projector announces that it does not support HDR
content so that the input device only sends out SDR signals.
- Auto: When receiving HDR signals, the projector automatically changes to HDR display mode.
• HDR Picture Mode
- Bright: Increase the color saturation for bright images.
- Standard: Make the images look more realistic and natural.
- Film: Improve the image details for videos.
- Detail: Improve image details in dark scenes.
Dynamic Black
Set up the Dynamic Contrast to maximizing the contrast for dark content.
• Dynamic Black: Enable the function to automatically adjust the contrast ratio for video sources. It
improves the black level in dark scenes by reducing the light output.
-
Speed: Adjust the speed of the light source correction. The value ranges from 1 to 15. A lower value
makes the correction slower and less aggressive while a higher value results in the faster correction.
- Strength: Set the strength of the dynamic contrast adjustment. The value ranges from 0 to 3, the
higher the value the stronger the correction.
User control — Image menu