![background image](http://html1.mh-extra.com/html/barco/fsn-series/fsn-series_user-manual_3894029045.webp)
FSN Series • User’s Guide
45
2. FSN-1400 Orientation
Card Descriptions
13) DSK Cut In
One BNC is provided for a dedicated
DSK Cut Input
. The
DSK Cut
and
DSK Fill
inputs must be locked to the FSN-1400 video reference within ± 0.5 lines, when
the
{Output V-Lock}
button is turned off (on the
Reference and Output Setup
Menu
). See the
DSK Fill In
description below for an important note.
14) DSK Fill in
One BNC is provided for a dedicated
DSK Fill Input
. The
DSK Cut
and
DSK Fill
inputs must be locked to the FSN-1400 video reference within ± 0.5 lines, when
the
{Output V-Lock}
button is turned off.
15) Native Aux Outputs
Six BNCs are provided for the system’s six
Native Aux Outputs
. Source
selection is performed in the
Aux Assign Section
on the panel. In Chapter 3,
” heading on page 60 for details.
Important
When the
{Output V-Lock}
button is turned on (on the
Reference and Output Setup Menu
), the position of the
DSK Cut
and
DSK Fill
inputs on screen will change.
•
If the user preference “
Black on Invalid Video
” is
turned on, the DSK turns off — because of the change
in output timing.
•
If the user preference “
Black on Invalid Video
” is off,
the DSK will be visible — but in a shifted position. In
this condition, the video position can be adjusted by
changing the output timing of the DSK source itself.
In Chapter 5, refer to the “
on page 217 for details on the
Black on Invalid Video
mode.