258
FSN Series • User’s Guide
6. System Setup
Button Mapping
_ìííçå=j~ééáåÖ
FSN Series system setup:
Step 12
This procedure enables you to map individual inputs to the panel. The menu also enables
you to map linear key cut and fill signals, test patterns and color background signals.
S
Prerequisite
— Ensure that you are familiar with the
Map Buttons Menu
. In
Use the following steps to map buttons:
1.
In the
Menu Bar
, press
{System}
to access the
System Menu
.
2.
Press
{Map Buttons}
to display the
Map Buttons Menu
.
3.
Use the
{Panel Button}
control to select the button you wish to map. Press
{SHIFT}
to map the button’s shifted position. The table changes accordingly.
4.
To map an input (source) or a linear key “cut” signal to the selected button, press
{Map Source/Cut}
. The
Map Buttons Keypad
appears.
~
To map a source, press
{Source}
to display sources only. Select the
desired source and press
{Map}
.
~
To map a test pattern, press
{Test Patterns}
to display internal test
patterns only. Select the desired test pattern and press
{Map}
.
~
To map a color background signal, press
{Color BG}
to display the four
available internal color background signals. Select the desired signal
and press
{Map}
.
5.
To map a linear key “fill” signal to the selected button, press
{Map Linear Key
Fill}
. The
Map Buttons Keypad
appears.
~
To map a source, press
{Source}
to display sources only. Select the
desired source and press
{Map}
.
~
To map a test pattern, press
{Test Patterns}
to display internal test
patterns only. Select the desired test pattern and press
{Map}
.
~
To map a color background signal, press
{Color BG}
to display the four
available internal color background signals. Select the desired signal
and press
{Map}
.
6.
To clear a source from the panel, select the button you wish to clear, then press
{Clear Source/Cut}
.
7.
To clear a linear key fill source from the panel, select the button you wish to clear,
then press
{Clear Linear Key Fill}
.
Please note the following important points:
•
When a source is mapped to a button on which another source is already
mapped, the previous source is overwritten and un-assigned. On the
Input
Menu
, the previous source's BNC turns yellow, but its name remains in the table.
12
