![background image](http://html1.mh-extra.com/html/barco/fsn-series/fsn-series_user-manual_3894029158.webp)
158
FSN Series • User’s Guide
5. Menu Orientation
Memory Menu
jÉãçêó=jÉåì=^ÅÅÉëë
There are two ways to access the
Memory Menu
:
•
In the
Menu Bar
, press
{Page}
to display page
2
(if required). Then, press the
{Memory}
button.
•
Press and hold either the
STORE
or
RECALL
button in the control panel’s
Memory Section
.
When either of the two methods above are used, the following rules apply:
•
If neither the
STORE
nor the
RECALL
button is lit, you will access the menu in
View Mode
.
•
If
STORE
is lit, you will access the menu in
Store Mode
.
•
If
RECALL
is lit, you will access the menu in
Recall Mode
.
Note
Regardless of the mode, you will always return to the last
menu used, either the
Memory Menu
or the
Enables Menu
.
For example, if you are working on the
Enables Menu
and
you jump over to the
Transition Menu
, you will return to the
Enables Menu
.
Important
Remember that you can store and recall memory registers by
using the
Memory Section
on the control panel only —
without accessing the
Memory Menu
. In this “panel only”
mode, you can select registers and modules, but you cannot
modify any Enables. Please note:
•
If you store a register using the control panel’s
Keypad
only (without using the
Memory Menu
), all
Enables will be on.
•
If you recall a register using the control panel’s
Keypad
only (without using the
Memory Menu
), all
Enables will be on — exactly as stored in the register.