Barco FSN-1004, Руководство пользователя, Страница: 119 / 246

FSN-1004 • User’s Guide • Rev 00 119
4. Menu Orientation
System Menu
`çååÉÅíçê=`çäçêë
On the Rear I/O Views of the UIC and M/E panels, the color of the individual input
connectors is significant:
•
Green indicates that the input is mapped to the GUI, and the signal is OK.
•
Red indicates that the mapped input has an “ LOS ” or “ Invalid Signal ” error. In
this situation, the input’s Programmable Display turns red, and the red “ Error ”
button appears in the top right corner of the Touch Screen . Press the {Error}
button to learn more. Refer to the “ Notes and Error Messages ” section on
page 81 for details.
•
Yellow indicates that the input is un-mapped, and a signal is present.
•
White indicates that the input is un-mapped, and no input signal has been
detected.
The above “color” information is always available on the Input Menu and External DSK
Setup Menu . Press {Info} to display the Input Color Legend Pop-up :
Figure 4-49.
Input Color Legend pop-up
Note For the input connectors on the UIC , this “ red ” condition only
occurs if the input has been mapped to the panel, and the
signal was previously OK.
Note If desired, use the {Error Reporting} button to turn the red
error message off, and return the Programmable Display to
green. In this mode, the connector remains red. In
Chapter 6, refer to the “
Understanding Error Messages ”
section on page 186 for full details.
Info
Slot 1, Input 8:
Input color legend
Close
Note
Input mapped, signal OK
Input mapped, error or no signal
Input un-mapped, signal present
Input un-mapped, no signal