Barco FL40 series, Руководство пользователя

Страница: 58 / 126

R5910123 /00 FL40 / FS40 Projectors
58
6.1 Connector selection
About
Home/Source
Image 6-1
Click on the relevant input connector icon to swap or activate the source.
The icon for the active source is highlighted.
The list of displayed sources can be adjusted to include other connectors.
The default selection of connectors displayed is:
• Display Port 1
• Display Port 2
• Dual Displayport Columns
• Dual Displayport Sequential
• DVI 1
• DVI 2
• Dual DVI Columns
• Dual DVI Sequential
• HDBaseT
• HDMI
6.2 Connector settings
About connector settings
The Connector Settings menu allows you to change settings for each input connector of the projector.
By default all options for every connector are set to automatic, together with the native Extended Display
Identification Data (EDID).
When entering the menu for each input connector, you can change the following:
• Color Space
• Signal Range
• EDID
Source menu