Barco FL40 - 4K, Руководство пользователя

Страница: 69 / 126

R5910123 /00 FL40 / FS40 Projectors
69
The white point is specified on a Kelvin scale between 3200K and 13000K tracking along the black body
curve.
You can reset all coordinates to the default values (to native) by selecting Reset modes to native.
Press
OK button to reset.
7.6.2 Edit the RealColor presets.
Editing presets
The different presets in the Real Color menu can be edited to obtain an optimal rendering of the picture.
Enter the menu Home/Image/Advanced/P7 Realcolor.
Select the desired preset mode (EBU, Rec709 or SMPTE-C) and select the coordinate within each color
component that has to be corrected. Enter the desired value either by:
- Using the keypad to increase /decrease the selected value by the arrow keys.
- Using the remote control: Erase the existing value with the “ * ” key, and enter the new value by the
numeric keys.
The values are stored for the preset, until the “ Reset ” button is enabled, or when a factory reset is performed.
There is also a possibility to store the values in the custom presets.. Press the “ Copy preset to custom ” button
to save.
The edited presets can be reset to the original values by enter the Reset button. There is also a possibility to
copy the values to the custom preset.
To reset the values in Custom presets, enter the “ Reset to native ” button when in Custom mode
Image 7-13: Change coordinate values.
Image 7-14: Reset the edited values to original
Image menu