Barco F70-W8, Руководство пользователя

Страница: 55 / 74

7. Image menu
Default value: 0.00
7.5 Saturation
About
Image / Saturation
Saturation levels impact on the white levels and the intensity of the color display; the higher the value, the more vivid the color display
will be.
Available range: —1.00 to 1.00
Default value: 0.00
7.6 Advanced image adjustments
About
Image / Advanced
Advanced image adjustment settings that enable greater control, particularly during calibration.
Not all settings are available for all source types. Settings that are not available for the active source will be
grayed out and not available for selection.
P7 RealColor
Advanced functionality for color management.
Image / Advanced / P7 RealColor —>White point
Select how to adjust the white point. There are two alternatives: temperature and coordinate.
Temperature The white point is speci fi ed on a Kelvin scale between 3200K – 13000K tracking along the black body curve.
Coordinate Coordinate: The white point is speci fi ed using an x,y coordinate in the CIE 1931 Chart.
Color mode
Image / Advanced / P7 RealColor —>Color Mode
Used to set the coordinates for color processing mode: RGB, RGBCMY, White.
RGB Red, Green and Blue are moved according to the speci fi ed desired coordinates. Cyan, Magenta and Yellow
are calculated accordingly.
RGBCMY Red, Green, Blue, Cyan, Magenta and Yellow are moved according to the speci fi ed desired coordinates.
White White point only. No changes to RGBCMY. Default: White
Native Native Colors. (Color Correction Off).
Native values
System Setting/ Service / Color —>Measured values
The current measured values (WRGB ) used for RealColor processing.
These values must be accurate for RealColor to perform correctly.
Current values are presented in the color gamut diagram. Measured values are represented by a solid line.
Default: values measured at the manufacturers facility.
Custom values
Image / Advanced / P7 RealColor —>Desired values
Allows users to speci fi cyn red, green blue, cyan, magenta and yellow color coordinates (x,y) and gain.
Default: REC 709 color points.
Current values are presented in the color gamut diagram. Desired values are represented by a dotted line.
601–426 F70 SERIES 16/06/2017 51