Barco F70 - W6, Руководство пользователя

Страница: 60 / 74

8. Installation menu
Image 8-5
Installation menu, Warp
2. In the Warp menu, select Bow .
Image 8-6
Warp menu, Bow
A check symbol at the bottom right corner indicates that the bow function is activated.
3. To enable Bow correction, make sure the Bow slider is set to On .
The slider is enabled when set to the right and when it is colored blue.
Image 8-7
Bow adjustment
4. To enable a symmetric adjustment, make sure the Symmetric slider is set to On .
The slider is enabled when set to the right and when it is colored blue.
5. Select an adjustment point and use the arrow keys to adjust.
When selecting a mid point of an edge, the bow angle can be adjusted.
When selecting a corner point, the linearity can be adjusted.
To reset the bow adjustments, select Reset and press the OK button.
8.5 Basic Blend
About
When two projectors are used together to make one picture on the screen, the blend function must be activated. This blend function
ensures a seamless transition of the images between the two projectors.
The principle is that the light intensity in the blend zone from each projector will be adjusted individually, so that the rendering on the
screen are perceived as from one projector.
The blend function can be enabled for both pictures over/under, and pictures side by side.
56 601–426 F70 SERIES 16/06/2017