Barco F70 Series, Руководство пользователя

Страница: 156 / 218

601–426 /15 F70 Series 156
Until recently, it was not possible to navigate through the on-screen display (OSD) of the projector
while in Ready mode. This feature has been implemented from software version 1.7 onward.
How to enable/disable the ECO mode
1. In the main menu, select System Settings .
2. In the System Settings menu, choose to either enable or disable ECO mode by using the ECO mode
slider. While ECO mode is available, the slider is colored blue.
Image 10–16 Settings menu, enable ECO mode
10.11 Power settings
About power settings
If the power is off, and there is no activity, the projector will go to standby after a defined time.
Set Power settings timeout
In the power settings menu, the standby timeout can be selected.
Enter the menu Settings / Power settings
Image 10–17
Select the desired time bu the arrow keys on the remote control, and press enter.
10.12 Lens features
About
In order to prevent unintentional lens adjustments, especially after e. g. a completed setup and adjustment,
there is a possibility to disable certain lens adjustment functions. These functions are directly accessible via
the remote control, and can by that easily be adjusted by accident.
Enter the menu shown below, and disable the desired functions by toggling the desired buttons. The menu
below shows all lens options in enabled position.
System settings menu