Barco F400, Руководство пользователя

Страница: 12 / 220

R5915525 /00 Fx400 Series 12
1.1 General considerations
WARNING: Be aware of suspended loads.
WARNING: Wear a hard hat to reduce the risk of personal injury.
WARNING: Be careful while working with heavy loads.
WARNING: Mind your fingers while working with heavy loads.
WARNING: In case of optical radiation emergency, please disconnect the device from the mains
current; this by employing the mains switch. In case the mains switch is not easily accessible, the
projectors shall be disconnected by other means for example the mains junction box.
It is advised to employ the shutter or select a black image on the projector in order to reduce the risk
of the emergency.
Notice on optical radiation from F400 series projectors.
• Do not stare into Beam.
• This projector is Risk Group 2 (RG2) according to IEC EN 62471-5, and may become RG3 when using a
lens of a throw ratio (TR) larger than 3.0.
• Any operation or adjustment not specifically instructed by the user’s guide creates the risk of hazardous
light radiation exposure.
• Do not open or disassemble the projector as this may cause danger to unauthorized personnel.
• Simulated single fault condition testing ensures the safety on the equipment to the user even when the
equipment’s normal operation fails.
• Additional RG2 warning against eye exposure for close exposures less than 1m. WARNING:
MOUNT ABOVE THE HEADS OF CHILDREN.
This projector embeds high brightness (radiance) lasers; this laser light is processed through the projector's
optical path. Native laser light is not accessible by the end user in any use case. The light exiting the projection
lens has been diffused within the optical path, representing a larger source and lower radiance value than
native laser light. Nevertheless, when RG3, the projected light represents a significant risk for the human eye
and skin when exposed directly within the beam. This risk is not specifically related to the characteristics of
laser light but solely to the high thermal induced energy of the light source; which is equivalent with lamp
based systems.
When the projector is defined as RG3 group
Thermal retinal eye injury is possible when exposed within the Hazard Distance (HD). The HD is defined from
the projection lens surface towards the position of the projected beam where the IR radiance equals the
maximum permissible exposure as described in the chapter “Hazard Distance”.
WARNING: No direct exposure to the beam within the hazard distance shall be permitted, RG3
(Risk Group 3) IEC EN 62471-5:2015
General safety instructions
• This product contains no user serviceable parts.
Attempts to modify/replace mechanics or electronics inside the housing or compartments will violate any
warranties and may be hazardous.
• Do not stare into beam when the projector is on. The bright light may result in permanent eye damage.
• Before operating this equipment please read this manual thoroughly and retain it for future reference.
• Installation and preliminary adjustments should be performed by properly trained and qualified personnel.
Safety Information