Barco Event Master E2, Руководство пользователя

Страница: 95 / 307

6. GUI orientation
6.14 Con fi guration Menu > Adjustment > Background Con fi guration
General
Assigning input connectors to backgrounds is very similar to creating Inputs as it was discussed in the previous section. Therefore,
the menus are also very similar and for the sake of simplicity the same menus are not going to be presented in this section.
One of the differences between Inputs and backgrounds is in the number of connectors that can be assigned to each one. As it
was presented in the previous section, an input can be de
fi ned from 1, 2 or 4 connectors. A background channel, however, can be
de fi ned by any number of connectors between 1 and 8. The same rules apply as in the Input de fi nition: The connectors need be on
the same or adjacent card and be of the same type with the exception of DVI and HDMI that can be de fi ned in the same background.
Background Adjustment panel description
If the selected background is composed by more than one input connector, the adjustment menu will include a diagram of the con-
fi guration. The diagram defaults to a horizontal con fi guration. If a vertical con fi guration is desired, the user clicks in the circle next
to the “V” and then the Apply button
Image 6-21
Please note that connector assignments for the backgrounds cannot change from what is shown in the dia-
gram. The system wiring needs to re
fl ect the same order
R5905948 E2 12/12/2014 91