Barco Event Master E2, Руководство пользователя

Страница: 68 / 307

5. Front Panel Menu orientation
5.14 Restoring Factory Default Settings
General
As shown in the following illustration, two options in the Setup Menu allow you to restore the E2 to its factory default condition.
Image 5-27
The following attributes constitute a factory default condition:
•
The Status Menu is shown in the display screen.
• All custom con fi gurations are deleted.
The Factory Reset Menu provides two options for restoring factory default settings:
• Factory Reset — If you use this option, all of your system con fi guration are deleted. Settings will be restored to the original
factory defaults.
• Factory Reset, Save IP — This option performs a factory reset, but retains the IP address of the E2.
It is advisable to clear all saved con fi gurations when you use the E2 for the fi rst time, or when returning an
E2 from an event.
Restoring all factory settings
To restore all default settings to the E2, use the following procedure:
1. Select
Factory Reset from the Setup Menu.
The Factory Reset Menu appears.
2. Select Factory Reset .
A prompt appears, asking if you want to clear all con fi gurations.
3. Press SEL .
The system turns off, then reboots.
If you press ESC to cancel the operation instead, your custom settings remain in place and you are returned to the Factory
Reset Menu.
Retaining the IP address when restoring factory settings
To restore default settings to the E2 but retain the unit’s IP address, use the following procedure:
1. Select
Factory Reset from the Setup Menu.
The Factory Reset Menu appears.
2. Select Factory Reset, Save IP .
A prompt appears, asking if you want to clear all con fi gurations.
3. Press SEL to reset the system but save the IP address.
The system turns off, then reboots.
If you press ESC to cancel the operation instead, your custom settings remain in place and you are returned to the Factory
Reset Menu.
64 R5905948 E2 12/12/2014