Barco Event Master E2, Руководство пользователя

Страница: 103 / 307

6. GUI orientation
6.16 Con fi guration Menu > Adjustment > Destination Con fi guration
General
Output con fi guration that are created in the previous menus are assigned to destination in the Destination Panel.
Description
Destination con fi guration menu is accessed by clicking on the Destination tab.
This menu provides:
•
A list of all the destinations (Screen, Aux) already created on the system
(e.g. ScreenDest1)
• A button to add screen destination.
• A button to add Aux destination.
• A button to delete unused or obsolete destination(s).
The user can assign outputs to output con fi gurations manually, automatically or delete outputs from con fi gurations.
Destination formats
Few words about destination formats:
•
For Screen Destinations: All subsequent new output con fi gurations added to the Screen Destination will have its output format
updated to match the Screen Destination output format. If the fi rst output con fi g in the Screen Destination is deleted and a new
output con fi guration is added, then the new output format becomes as the destination output format again.
• For AUX Destination: An AUX destination always assumes the format of the output con fi guration that is assigned to it.
Rules
There several rules that apply when de fi ning an Destination con fi guration:
1. Destinations accept only the same output connector types. SDI and HDMI connectors cannot be mixed in the same destination.
2. Destinations accept only output con fi gurations with the same number of output connectors. For example if the 1st output con-
fi guration added is an HDMI output con fi guration with 2 connectors, an HDMI output con fi guration with 1 connector cannot be
added to the same destination.
3. Cannot add an output con fi guration to a destination if it is not capable of using the Output format selected. For example: An
Output con fi guration has a total connector capacity of 2 it cannot be assigned to a 4K destination.
4. Cannot add different output con fi gurations with different number of output connectors. For example if the 1st output con fi gura-
tion added is a HDMI output con fi guration with 2 connectors, an HDMI output con fi guration with 1 connector cannot be added
to the same destination.
More about AUX Destinations
Based on the layer mode, the user can create AUX Destination on an output card. Layer mode is set in the System Modi fi er Panel.
Layer Mode HDMI & SDI Output Card Max. Number of Outputs
2K (Single link) 4
Dual Link 2
4K - UHD 1
Color codes
Screens and Aux are represented graphically in the Diagram area.
Green: Output(s) have been assigned to the destination
Yellow: Output(s) have not been assigned to the destination.
R5905948 E2 12/12/2014 99