Barco EOS X Terminal, Руководство пользователя

Страница: 48 / 195

3. Getting started
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-2004
___________________________________________________________________
3-30
3.2.13 Distributed system
With the distributed system, the O
VER
V
IEW
projection modules are connected to the graphic cards of the rendering
machines. Each rendering machine operates a rectangular array of projection modules within a display wall. The
actual subdivision into arrays depends on the requirements of each display wall (e. g. displaying video). The
following figure shows an example for a 9×5 arrangement:
Figure 3-40
Example for the assignment of rendering machines and projection modules
Additional information about the assignment of rendering machines and projection modules
can be found in section
6.2.7 Advanced Eos configuration (channels) .
The rendering machines are connected to the central E
OS
within a separate Sub-net (see also section 3.2.12
Network ). Therefore the central unit is equipped with an additional network card. If also for the LAN connection an
extra network card is used and not the onboard LAN adapter, then the network card with the lower Ethernet
address, respectively the higher PCI slot number connects to the LAN, the card with the higher Ethernet address,
respectively the lower PCI slot number connects to the Sub-net.
Sub-net
PCI 1 PCI 2 PCI 3 PCI 4 PCI 5 PCI 6
LAN Sub-net
PCI 1 PCI 2 PCI 3 PCI 4 PCI 5 PCI 6
Figure 3-41
Example for network cards in the central processor:
LAN connection via onboard LAN adapter (left) and via a network card (right)
The rendering machines are equipped with one network card each:
Sub-net
PCI 1 PCI 2 PCI 3 PCI 4 PCI 5 PCI 6
Figure 3-42
Network cards in a rendering processor