Barco E-2320 C, Системное руководство

Страница: 57 / 104

B
ARCO
MXRT control panel settings
57
B
ARCO
MXRT control panel settings
This chapter describes how to configure the displays in your B
ARCO
N
IO
Display System using the tools available through the
Advanced
button
on the
Settings
tab of the
Windows Display Control Panel
.
Note:
If you purchased Barco Medical Displays only and not a
complete B
ARCO
N
IO
Display System you will need to refer to the
user manual for the display controller you are using.
Accessing the Barco tab
Note:
You must have logged on to Windows using an account
with administrator privileges in order to use the Barco portions
of the
Windows Display Control Panel
to change any display
settings.
1.
Open the
Windows Display Control Panel
by one of the two
methods below:
a)
Start > Settings > Control Panel > Display
or
b)
Open the
“Display Properties Control Panel”
by right
clicking in an empty area on the desktop, then select
Properties
.
2.
Click on the
Settings
tab.
3.
Select the
rectangle
that represents the Barco Nio display
whose settings you wish to change.
4.
Click on the
Advanced
button.
5.
Select the
Barco
tab from the Properties screen.
Using the Barco tab
The Barco tab is divided into three sections. The first section provides
information about the graphics controller and allows access to the