![background image](http://html1.mh-extra.com/html/barco/dp4k-32b/dp4k-32b_service-bulletin_4079584007.webp)
Barco service bulletin
1.4 Validating the correct orientation of the magnet in the motorized
XL Lamp House
To validate the correct orientation of the magnet, the XL Lamp House
must be removed from the projector. This procedure assumes that the
Lamp House is already removed from the projector.
Contact the Barco helpdesk to receive the caliber magnet.
Image 1-7
The look of the Lamp House in the pictures can differ from the look of
your own Lamp House. However, the procedure to perform is exactly the
same.
Necessary tools
• Caliber magnet (north side of the magnet is painted in red)
• 3 mm Allen wrench
How to validate a motorized Lamp House?
1. Position the Lamp House on a
fl
at and stable table, with the
UV
fi
lter side resting on
the table
.
Page 7 of10
InfoT: 1160