Barco DP2K SLP Series, Руководство пользователя и инструкция по установке

Страница: 30 / 175

3. Installation process
3.3 Starting up and adjusting the system
Adjustment steps
1. Select the corresponding lens parameters for the installed lens . See user guide of the Communicator chapter Installation >
Advanced > Lens parameters .
2. Alignment of the projected image on the screen . The image can be aligned with the screen size of the application. Follow
the next steps to achieve that:
a) Press the
STANDBY button on the Local Keypad to activate the light source.
b) Press the DOWSER button on the Local Keypad to open the electronic dowser of the projector. The electronic dowser is open
if the color of the DOWSER button is GREEN.
c) Press the TEST PATTERN button on the Local Keypad to project one of the internal test patterns of the projector on the
screen.
d) Perform a “ Lens Homing ”. See user guide of the Communicator.
e) Use the lens ZOOM , SHIFT and FOCUS buttons on the Local Keypad to match the projected image with the screen. Tilt the
projector in case you can not SHIFT the image completely upon the screen. See "Positioning the DP2K SLP-series projector
at port window", page 28.
See chapter "Local Keypad", page 43, for detailed description of the Local Keypad buttons.
3. Adjusting the light path . Normally the lens holder and the convergence of the projector are perfectly adjusted at the factory.
Nevertheless, some applications require a readjustment of the lens holder, convergence or both. See procedure "Scheimp fl ug",
page 93, and "Convergence", page 105.
4. Creating screen fi les, lens fi les, and macro fi les for FLAT and for SCOPE . See user guide of the Communicator.
5. Perform Color calibration . See chapter "Color calibration", page 113.
6. Create light sensor calibration (LSC) fi les. See user guide of the Communicator.
7. Backup of all projector con fi guration fi les . See user guide of the Communicator.
8. Registration of the projector . The DP2K SLP-series projector is DCI compliant and should be registered.
9. Projection of a digital cinema movie .
In case the projector is equipped with an ICMP, download the ICMP device certi fi cate, request KDM and DCP from your content
supplier, ingest KDM and DCP, and play out the movie. for detailed instructions see chapter "ICMP", page 53, and user guide of
the Communicator and/or (Web) Commander.
In case the projector is equipped with a HD-SDI input module apply a single or dual channel SMPTE (HD-SDI) source to the input
ports of the HD-SDI input module and start up the projector. See chapter "Starting up", page 89. Use the Communicator (Touch
Panel) to con
fi gure the applied source. See the user guide of the Communicator (Touch Panel) for more detailed information.
In case the projector is equipped with an Integrated Media Block (IMB) or Integrated Media Server (IMS) see user guide of the
IMB or IMS for detailed instructions.
26 R5906847 DP2K SLP SERIES 02/06/2017