Barco DP2K Series Скачать руководство пользователя страница 196

Страница: 196 / 287

5. Installation

Image 5-70
List of available keys

Image 5-71
List without master key

5.9.11.3 Add extra key to the list

Only root users are user holding the master key can add extra keys.

How to add an extra key

1. Display

rst a list of all available keys.

2. Tip on a free key location (1). (image 5-72)

The background changes.

3. Tip on the

Add key

icon (2).

The key code window opens (3).

4. Enter the key code of the dallas iButton® (4).

5. Enter a pin code for this key (5) and click

(6).

The new key is added to the key list (7).

6. Tip on

Save key list

icon to make the changes active (8).

192

R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012

Содержание DP2K Series
































































































































































































































































































Результаты поиска

Содержание DP2K Series

Отзывы:

Barco DP2K Series, Руководство пользователя, Страница: 196 / 287

Результаты поиска

Содержание DP2K Series

Отзывы: