Barco DP2K-17BLP, Руководство пользователя и инструкция по установке

Страница: 34 / 185

4. Physical installation projector
Image 4-7
Terminal strip accessible
The terminal strip and connection plate is accessible.
4.3 Power input setup of the DPxK-36BLP
About the power input
The projector power input can be con fi gured for a power supply of 230/400V 3W+N+PE ( Υ -connection) or for 208V 3W+PE ( Δ -con-
nection). Before operating the projector, place the links in the correct position depending on the local power supply.
For a 3W+N+PE system, 400V is measured between the lines, 230V is measured between the lines and the neutral.
For a 3W+PE system, 208V is measured between the lines.
A B
Image 4-8
Υ - Δ connection
A Υ connection
B Δ connection
Necessary tools
• Flat screw driver
• Wrench 10 mm
• Torque wrench 10 mm
How to switch from a Υ -connection to Δ -connection
1. Loosen the 6 top nuts on the Υ / Δ con fi guration block. (1 to 6)
30 R5906753 DPXK BLP SERIES 20/11/2017