Barco DCS-200, Руководство пользователя

Страница: 39 / 170

DCS-200 • User’s Guide 39
4. Operation
Using the Menu System
rëáåÖ=íÜÉ=jÉåì=póëíÉã
This section lists the rules and conventions for using DCS-200’s menu system. For
reference, the figure below illustrates the
Setup Menu :
Figure 4-7. Setup Menu (sample)
For all setup menus, please note the following important menu rules and conventions:
•
The top line names the current menu, in all capital letters.
•
Subsequent lines typically display two fields:
~
For a listed function , the left-hand field names the function, and the
right-hand field is the function’s current parameter or value.
~
For a listed sub-menu , the left-hand field names the sub-menu that you
can access, and the right-hand field displays the double arrow ( >> ),
indicating that a sub-menu is available.
•
The “navigation” cursor ( > ) in the left-hand column indicates the current line on
which action can be taken. This arrow “scrolls” as you rotate the knob.
•
Scrolling:
~
Turn the ADJUST knob counter-clockwise ( CCW ) to scroll down.
~
Turn the ADJUST knob clockwise ( CW ) to scroll up.
•
To enter a sub-menu, scroll to the desired line and press
SEL
.
•
To change a parameter, scroll to the desired line and press
SEL
. The cursor
changes to the “edit” cursor (
#
). Use the ADJUST knob to modify the value:
~
Turn the ADJUST knob CW to increase a value.
~
Turn the ADJUST knob CCW to decrease a value.
•
To accept a parameter or value, press
SEL
. The edit cursor changes back to the
navigation cursor.
•
In the “edit” mode, to exit (or cancel) without changing the original parameter,
press
ESC
.
•
To navigate back up the menu structure, press
ESC
. Each press takes you back
up the menu tree by one level.
S E T U P M E N U
> T r a n s T i m e
1 . 0
O u t p u t > >
P r e v i e w > >
Note Throughout this chapter, the term “ select ” is used as an
abbreviation for “scroll to a menu line and press SEL .”
S
Select the Input field to...
Note You must press SEL to activate a DCS-200 function.