Barco DB-220, Руководство по установке

Страница: 8 / 87

1. Safety
1.1 Safety guidelines
Personal protection
W
ARNING
:
Ensure you understand and follow all the safety guidelines, safety instructions, warnings and
cautions mentioned in this manual.
W
ARNING
:
Be aware of suspended loads.
W
ARNING
:
Wear a hard hat to reduce the risk of personal injury.
W
ARNING
:
Be careful while working with heavy loads.
W
ARNING
:
Mind your fi ngers while working with heavy loads.
Installation personnel
This installation must be performed by authorized and quali fi ed technical personnel only.
Accredited safety of fi cers must ensure the safety of the site, construction, assembly, connection, use, dismantling, transport etc. of
such safety critical systems.
Caution
Installation should be performed only after you are thoroughly familiar with all of the proper safety checks and installation instructions.
To do otherwise increases the risk of hazards and injury to the user.
Assembly parts are designed for intended use only in conjunction with DB-220 LED displays.
Do not modify and/or replicate any component. Barco uses speci fi c materials and manufacturing processes in order to achieve part
strength. Consult Barco for assistance with custom applications.
Always follow Barco installation instructions. Contact Barco if you should have any question regarding the safety of an application.
The manufacturer assumes no liability for incorrect, inadequate, irresponsible or unsafe assembly of systems.
Product care
Structural & mounting components should be kept dry, clean, lubricated (only if recommended), coated properly, and otherwise
maintained in a manner consistent with part design. Barco products must be used in a manner consistent with their design and
inspected on a routine basis for security, wear, deformation, corrosion and any other circumstances that may affect the load handling
capability of the part.
Barco recommends inspections at regular intervals for all installations and increasing in frequency for more critical installations. If
a part is found to have damage, which may cause a decrease in load capability, the part must be removed for service or replaced
immediately.
Under no circumstances are Barco parts repairable by anyone other than Barco.
4 R59770240 DB-220 11/06/2009