Barco Custom power box, Руководство пользователя

Страница: 15 / 19

4. Physical installation
6. Power up the Custom Power Box.
Tip: Measure the outgoing voltage on the power output connectors before connecting any devices with the power box.
7. Close and lock the Custom Power Box.
Image 4-3
Fixation nut on the backside of the Custom Power Box.
Image 4-4
Removed lower cover plate.
Image 4-5
Connector for power input.
4.3 Connections between custom power box and LED-wall
General
The custom power box is provided with multi-pole power output connectors. One multi-pole connector contains six (6) power circuits,
each protected with a 16 ampere rated circuit breaker.
A multi power cable is used to transport the power from the multi-pole connector to a spider connector. This spider connector
subdivide the power circuits into individual power source cables. Each power source cable of the spider connector leads to a group
of tiles. See installation manual of the involved tiles to know the maximum amount of tiles connected in parallel with the same power
source cable.
R5976620 CUSTOM POWER BOX 05/06/04 11