Barco CLM R10+ R90501001, Руководство пользователя

Страница: 110 / 229

10. Layout menu
10.3.4 Picture in Picture size of the window
What can be done?
The width and height of the picture in picture window can be changed till the desired dimensions are obtained.
Image 10-32
Size PIP window
A Width PIP window
B Height PIP window
The size of the picture in picture window can be changed with respect to the original aspect ratio of the PIP image.
Remark: when e.g. the PIP window is a 4 by 3 window and the projected image has a 16 by 9 format, then it is possible that image
jumps inside the PIP window during a re-scaling. Due to the fact that the re-scale is done on the vertical dimensions of the PIP
window and the image inside it will be re-scaled so that the aspect ratio is still correct.
Image 10-33
Size PIP window remark
How to change the size with respect to the aspect ratio?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Window and press ENTER .
3. Use the ▲ or ▼ key to select PIP Window and press ENTER .
The main window opens.
4. Use the ▲ or ▼ key to select Size and press ENTER .
The size adjustment window opens. (image 10-34, image 10-35, image 10-36)
5. Toggle with ENTER till Lock is set to [x]]. (image 10-37)
[ ] = no lock between height and width.
[x] = width and height are locked.
6. Use the ▲ ▼ or ◄ ► key to adjust the size with respect to the aspect ratio.
When the desired size is reached, press EXIT .
A Save window opens. (image 10-38)
7. Select with the ▲ or ▼ key Yes and press ENTER .
Select with the ▲ or ▼ key No , when no save is desired and press ENTER .
106 R59770021 CLM R10+ 11/10/2010