Barco CLM R10+ R9050100 Скачать руководство пользователя

Страница: 26 / 233

3. Physical installation

Image 3-6
Mounting the XLR adapter

2. Fasten the two screws (S) of the XLR adaptor. Turn each screw repeatedly one or two turns until both screws are tight.

3.1.4

Using the XLR adaptor of the RCU

How to use the XLR adaptor of the remote control unit ?

1. Connect a cable with XLR plug into the XLR adaptor.

2. Connect the other end of the cable with your CLM R10+.

3. Push the XLR adaptor completely against the rugged case of the remote control unit, as illustrated in the left image below, for

wired communication. Pull out the XLR adaptor (about 8 mm) to switch over to wireless communication.

Image 3-7

3.1.5

RCU usage possibilities

Summarized possibilities

Ref. Possibility description

Comment

RCU not wired

RCU wired (mini-jack)

Backlight illuminates continuously when wire is connected. Infra red
disabled.

RCU with rugged case not wired

RCU with rugged case wired (mini-jack)

Backlight illuminates continuously when wire is connected. Infra red
disabled.

RCU with rugged case and XLR adaptor
pulled out “REMOTE” and not wired

The XLR adaptor must be in the pulled out position “REMOTE”, otherwise
the RCU will not function.

RCU with rugged case and XLR adaptor
pulled out “REMOTE” and wired

The RCU will send the commands via infra red to the projector.

RCU with rugged case and XLR adaptor
pushed in “WIRED” and wired

The RCU will send the commands via the cable connected with the XLR
adaptor to the projector. Backlight illuminates continuously when wire
is connected. Infra red disabled.

R59770021 CLM R10+ 15/03/2010

Содержание CLM R10+ R9050100










































































































































































































































Результаты поиска

Содержание CLM R10+ R9050100

Отзывы:

Похожие инструкции для CLM R10+ R9050100

Бренды по названию

Популярные бренды

Barco CLM R10+ R9050100, Руководство пользователя

Результаты поиска

Содержание CLM R10+ R9050100

Отзывы:

Похожие инструкции для CLM R10+ R9050100

Бренды по названию

Популярные бренды