Barco ClickShare CSE-200, Руководство по установке

Страница: 61 / 85

6. CSE-200 Configurator
Image 6-28
Network integration, PEAP selected
The PEAP mode window opens.
Image 6-29
Necessary Data to continue:
Domain The company domain for which you are enrolling, should match with the one de fi ned in your
Active Directory.
Identity Identity of the user account in the Active Directory which will be used by the ClickShare Buttons to
connect to the corporate network.
Password The corresponding password for the identity that you are using to authenticate on the corporate
network. Per Base Unit each Button will use the same identity and password to connect to the
corporate network.
Corporate SSID The SSID of your corporate wireless infrastructure to which the ClickShare Buttons will connect.
Click Next to continue.
When having problems connecting the Button to your corporate network, to get feedback from the Button please have a look at
the ClickShare Client log. This log can be pressing the holding Shift key when starting the Client executable. Look for the lines
“EDSUSBDongleConnection::mpParseDongleMessages” . An error code and a short summary of the issue should be logged.
6.16 Network integration, WPA2-PSK security mode
About WPA2-PSK
WPA2-PSK does not distinguish between individual users, there is 1 password (PSK – Pre-Shared Key) for all clients connecting
to the wireless infrastructure. This makes setup very straightforward. Once connected, all data transmitted between client and AP
(access point) is encrypted using a 256 bit key.
R5900023 CLICKSHARE CSE-200 13/07/2016 49