Barco ClickShare CSE-200, Руководство по установке

Страница: 50 / 85

6. CSE-200 Configurator
6.8 Display setup
Resolution
The output resolution to the display is set on Auto. That means that the CSE-200 output resolution is automatically adapted to the
resolution of the display. For HDMI displays, a hot plug detection is available.
Screen saver setup
1. Log in to the Con fi gurator .
2. Click Display & Audio → Display & Audio .
Image 6-15
Display settings
3. To activate the screen saver, drag the slider bar to the left or to the right until the desired delay time is reached.
When the slider is set completely to the right, the screen saver will never be activated.
6.9 Audio settings
About the audio settings
The audio functionality can be disabled or enabled. When the enable and/or disable setting is changed, the Buttons must be re-paired
before the setting becomes active.
Image 6-16
Audio settings
How to change
1. Log in to the Con fi gurator .
2. Click Display & Audio → Display & Audio .
3. Check or uncheck the check box next to Enable Audio.
38 R5900023 CLICKSHARE CSE-200 13/07/2016