Barco ClickShare CSE-200, Руководство по установке

Страница: 45 / 85

6. CSE-200 Configurator
6.4 Meeting room information
About meeting room settings
The following settings are possible:
•
Meeting room name
• Meeting room location
• Welcome message on the ClickShare screen
• Show meeting room info
• Show network info
• Show source names
Image 6-8
Personalisation, On-Screen ID
Meeting room name, location and welcome message
1. Log in to the Con fi gurator.
2. Click Personalisation → On-screen ID .
3. Click in the input fi eld next to Meeting room name and enter a name for the meeting room.
This text is shown on the user’s device when the Button is ready to share ("Ready to share on..."), on the central screen connected
to the Base Unit and in the list of AirPlay receivers on the user’s iOS device.
4. Click in the input fi eld next to Location name and enter the location.
5. Click in the input fi eld next to Welcome message and enter the desired message.
Show on-screen information
1. Log in to the Con fi gurator.
2. Click Personalisation → On-screen ID .
3. Check the check box in front of Show meeting room info .
Checked: meeting room name, location and welcome message are displayed on-screen when nothing is shared.
Not checked: nothing is shown on-screen.
4. Check the check box in front of Show network info .
Checked: LAN information such as wired IP address, hostname are displayed. Also the Wi-Fi IP address and SSID are displayed.
Not checked: no LAN nor Wi-Fi information is displayed.
5. Check the check box in front of Show source names .
R5900023 CLICKSHARE CSE-200 13/07/2016 33