Barco Cine VERSUM 50, Руководство пользователя

Страница: 28 / 37

5. SWITCHING ON/OFF THE CINE VERSUM SYSTEM
5.2.1 Switching Off the system
How to Switch Off the system
After the power down procedure, the respective modules can be switched off:
1. Press the Power Switch (A) on the Cine VERSUM Master.(image 5-1)
Power is disconnected and the standby LED (B) turns off.
2. Turn the Power Switch (A), on the rear of the Cine VERSUM 50 (if in the link), in the [0] position. (image 5-2)
Power is disconnected and the standby LED (B) turns off.
3. Attention: If the standby LED blinks fast, it means the projector is still in the cooling down mode. Wait until the LED stops fast
blinking and then, press the Power Switch (A), on top of the Cine VERSUM 80 (if in the link). (image 5-3)
Power is disconnected and the standby LED (B) turns off.
5.2.2 Switching Diagram
Display module switching
Each switching overview starts in the first line with a Cine VERSUM System in the operation mode.
Image 5-4
22 R5976490 CINE VERSUM SYSTEM 06092002