Barco BDEM-01, Руководство пользователя

Страница: 21 / 68

21 K5902200 /07 Barco Demetra
8. The device serial number is registered.
9. The device downloads all images and data already available in the account (if any), to be able to operate
offline.
10. When the device onboarding is completed, the login screen is shown.
Setting up a WiFi connection using TLS
1. Complete the device onboarding procedure (see "Procedure", above) using a (temporary) WiFi connection
without certificates.
2. Upload the WiFi certificates in the Demetra Web Application (see “ Devices ” below Image 2 – 3 , for more
information).
3. Log in on the Demetra Scope.
4. Swipe down the status bar.
5. Tap
Settings and then Network settings .
6. Provided you are connected to a (temporary) WiFi network, the WiFi certificates are automatically
downloaded to your Demetra Scope.
7. In the Network settings screen, scroll down and tap WiFi preferences .
8. In the WiFi preferences screen, tap Install from storage .
9. The WiFi certificates that were uploaded in the Demetra Web Application should be visible in the Choose a
certificate screen.
10. Install the certificates and navigate back to the Network settings screen.
11. Select a network that uses EAP-TLS authentication.
12. Under
EAP method , select TLS .
13. Select your uploaded certificates under CA certificate and User certificate .
14. Complete the correct identity for this WiFi network and tap Connect .
2.4.2 Status bar
Overview
The status bar at the top right corner of the Demetra Scope display can be tapped or swiped down to:
• Log out the current user
• Access the Settings menu, including:
-
Network settings (including network connectivity test)
- Third-party licenses
- Factory reset (see “ Troubleshooting instructions ” , page 40 for more information)
- Serial number, software version and certification information
• View the remaining battery level
• View the cloud synchronization status
• View patient information and/or select a(nother) patient
Image 2 – 11
Installation and configuration