Barco BarcoSLM G10 Performer, Руководство пользователя

Страница: 42 / 135

4. Connections
OUT IN
On
R
9840450
HD SDI DIGITAL MODULE
OUT IN
On
9840110
SDI DIGITAL INPUT
COMM PORT TRIGGER OUT RS232/422 OUT RS232/422 IN
IR-Receiver Diagnostic Code
Green Operation
Red Stand-by
IR Sync OK
Hardwired
remote
CTRL 1
Hardwired
remote
CTRL 2
Two way
hardwired
remote
CTRL 3
On On
On On
DIGITAL VIDEO SOURCE
Digital
Video
DVI INPUT
DVI INPUT DVI OUTPUT
High Bandwidth 5 CABLE INPUT
High Bandwidth 5 CABLE INPUT
R G B H/C V
R G B H/C V
Image 4-6
How to select the digital input?
1. Key in the corresponding slot number on the RCU or the local keypad.
When a RCVDS05 is connected to the projector, the SDI input is available by keying in 83 or 84 on the RCU.
4.5.7 Digital Video Decoder Input
What can be connected to this input?
The following source types can be connected:
•
S-Video
• Component Video
• Composite Video
Which signal can be connected to the Digital Video Decoder module?
Connector name/
Input signal
Pb Y/Vid Pr S-Video
Component Video B-Y Ys R-Y
-
Composite Video
-
Video
- -
S-Video
- - -
S-Video
How to connect?
1. Connect the output of your source to the corresponding inputs on the Digital Video Decoder module. (image 4-7)
38 R5976562 BARCOSLM G10 PERFORMER 20/10/2004