Barco B-16 Mobile LED, Руководство по установке

Страница: 9 / 67

1. Safety
1.2 Important Safety instructions
Instructions:
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• IMPORTANT, plug holder clamps must be locked fi rmly on all controller units and power boxes to prevent the possible ingress
of fl uids or solid particles. Replace damaged clamps immediately.
• Clean only with materials or chemicals that are inert, nonabrasive, noncorrosive and non-marking. Consult the manufacturer
for further advice should any doubts exist regarding any cleaning procedure.
• Do not block ventilation openings. Install in accordance with the manufacturers instructions.
• Do not defeat the safety purpose of the polarized or grounding type plugs/sockets. If the provided sockets / plugs are damaged
then replacement of the defective parts must be undertaken immediately.
• Protect the power/data cords from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus. Replace damaged power/data cords immediately.
• Only use attachments/accessories speci fi ed by the manufacturer.
• Disconnect the power to this apparatus during lightning storms or provide suitable additional lightning protection. Unplug this
apparatus when unused for a long period of time.
• Refer all servicing to quali fi ed service technicians/personnel. Servicing is required when the B-16 Mobile LED has been dam-
aged in any way, such as hydraulic mast or generator is damaged, the B-16 Mobile LED does not operate normally.
• Use only with systems or peripherals speci fi ed by the manufacturer, or sold with the apparatus. Use caution during transporting
to avoid damage by possible tipping.
• Do not make use of the B-16 Mobile LED to climb on the display.
• Do not place a ladder against the display to access the tiles or for other purposes.
• Do not move the trailer when the B-16 Mobile LED display is in the air.
• Do not walk on the roof of the trailer as it has not been designed and reinforced for this purpose.
R59770490 B-16 MOBILE LED 07/01/2010 5