Limited 90-Day Warranty
Tech2Go warrants this product to be free from defects in workmanship
and materials, under normal use and conditions, for a period of 90 days
from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to
first return it to the store where it was originally purchased. Should this fail
to resolve the matter and service still be required by reason of any defect
or malfunction during the warranty period,Tech2Go will repair or, at its
discretion, replace this product without charge (except for a $10.00 charge
for handling, packing, return UPS/postage, and insurance). This decision
is subject to verification of the defect or malfunction upon delivery of this
product to the Factory Service Center listed below. The product must
include proof of purchase, including date of purchase. Before returning
this product for service, please first replace the batteries (if applicable) with
fresh ones, as exhausted or defective batteries are the most common
cause of problems encountered.
If service is still required:
1. Remove the batteries (if applicable) and pack the unit in a well padded,
heavy corrugated box.
2. Enclose a photocopy of your sales receipt, credit card statement, or
other proof of the date of purchase, if within the warranty period.
3. Enclose a check or money order payable to the order of Tech2Go, for the
sum of $10.00.
4. Send the unit prepaid and insured, to the Factory Service Center listed
below.
Consumer Repair Department
Tech2Go Inc.
1330 Goodyear Drive
El Paso, TX 79936-6420
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for
which it was designed. It does not cover (i) products which have been
damaged by negligence or willful actions, misuse or accident, or which
have been modified or repaired by unauthorized persons; (ii) cracked or
broken cabinets, or units damaged by excessive heat; (iii) damage to digital
media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping
this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not
extend to owners of the product other than to the original purchaser. In
no event will Tech2Go or any of its affiliates, contractors, resellers, their
officers, directors, shareholders, members or agents be liable to you or
any third party for any consequential or incidental damages, any lost profits,
actual, exemplary or punitive damages. (Some states do not allow limitations
on implied warranties or exclusion of consequential damages, so these
restrictions may not apply to you.) This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by
the above mentioned disclaimer of warranty is contractually binding to you
upon your transfer of currency (money order, cashier's check, or credit
card) for purchase of your Tech2Go product.
Distributed by Tech 2 Go, Inc. 1299 Main Street,
Rahway, NJ 07065-5024
MANUFACTURED IN CHINA.
Tech 2 Go is a trademark of Tech 2 Go, LLC.
© 2009 SDI Technologies, Inc. All Rights Reserved.
iHome is a registered trademark of SDI Technologies Inc.
BARBIE and associated trademarks and trade dress are owned by,
and used under license from, Mattel, Inc. © 2009 Mattel, Inc.
All Rights Reserved.
Important Message to Consumers
Thank you for purchasing one of the Barbie™ brand’s many top-quality electronic products. We would appreciate it if you take a few
moments to read through these instructions. This will help you explain the safe and proper way to use this toy, and to help give it the
long-lasting life that Barbie™ branded products are designed for.
Keep these instructions for future reference as they contain important information
BiM22
MODEL: BiM22 - Front
size: 215mm x 175mm
July 21, 2009
Color: Black
questions?
call toll free:
1-866-TECH-022
(
1-866-832-4022)
(USA only)
water-resistant stereo mp3 player
FCC Information
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide resonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Printed in China
• Do not mix with used or other battery types/brands
• Replace all batteries at the same time
• Do not open batteries
• Do not dispose of in fire
• Do not heat above 75ºC (167ºF)
• Do not expose contents to water
• Do not charge or recharge
• Do not install backwards
For models that require more than one battery
BiM22-072109-A
