barbas Unilux-7 52, Руководство пользователя

Страница: 13 / 28

6.2 First use of the appliance
Caution:
• Make sure there is sufficient ventilation in the room in which the appliance
is installed.
Note:
The appliance has a heat-resistant coating. When you use the appliance for
the first time, the coating can cause an unpleasant, but harmless smell.
After first few times of use of the appliance, a light deposit on the inside of the glass may
occur caused by curing of the paint. This can be removed with glass cleaner or ceramic
hob cleaner.
6.3 Firing the appliance
6.3.1 First load and ignition
At the beginning the appliance and chimney are cold. It is important that both the
appliance and chimney reach a temperature that guarantees a good functioning of the
appliance. A too low temperature results in incomplete combustion and a poor chimney
draught. To avoid this do the following:
Warning:
Do not use the appliance when there is fog or haze or no wind.
1. Put the control lever in the far right position.
2. If applicable, open the valve in the external combustion air supply line.
3. If applicable, open the chimney valve completely.
4. Open the door of the appliance.
Operation
Unilux-7 52 13