barbas Unilux-7 45, Руководство по установке и обслуживанию

Страница: 26 / 52

6.2.3 Horizontally align the appliance
1. Make sure that the appliance is installed horizontally. Use a spirit level.
2. Adjust the adjustable feet. Use a 13 mm fork spanner.
3. Make sure that the appliance is installed horizontally. Use a spirit level.
6.2.4 Final check on the appliance
1. Make sure the door closes and opens easy.
2. Make sure the control lever moves easy to left and right without undue noise.
3. Make sure all ceramic plates, the grate and the baffles are in the correct position.
Contact your dealer if the final check shows a defect.
6.3 Installation in a new fireplace
6.3.1 Install the appliance
1. Put the appliance on the intended and correct position.
2. If applicable, connect the external combustion air supply pipe to the appliance.
To connect the optional external combustion air supply to the rear of the appliance,
refer to chapter
6.3.2
.
To connect the optional external combustion air supply to the bottom of the
appliance, refer to chapter
6.3.3
.
Installation
26 Unilux-7 75