barbas Cuatro-7 75-60, Руководство по установке и обслуживанию

Страница: 36 / 76

8.8 Connect the convection set (optional)
1. On the convection air box select one
of the 2 inlet openings, identified by
FAN, on the left or right side.
2. Remove 1 break out plate in the
selected convection air inlet opening
with a hammer.
3. Put the collar adaptor in the open
inlet opening (1).
4. Bend out the 3 lips on the collar
adaptor (2) and turn the adapter until
it locks.
5. Connect a flexible aluminum pipe (C)
on the collar adaptor . Use a hose
clamp (B).
6. Connect the flexible aluminum pipe to a fitting box in the chimney breast
The convection air outlet can go via the front of the appliance and/or the top of the
appliance.
• Outlet of the convection air at the front of the appliance: refer to section 8.8.1 .
• Outlet of the convection air on top of the appliance: Refer to section 8.8.2 .
1
2
2
A
B
C
B
C
Installation in a new fireplace
36 Cuatro-7 75-60