7.
Attach the flue pipe connector to the appliance with the 4 screws. Make sure the
white gasket is in the correct position.
8.
Put a layer of ceramic wool on the top of the appliance. Refer to section
specifications of the ceramic wool.
9.
Put all the interior parts in the correct position in the appliance. Refer to section
for instructions.
7.4
Aligning with adjustable feet
1.
Adjust the adjustable feet. Use a 13
mm fork spanner.
2.
Align the appliance horizontal. Use a
spirit level.
7.5
Final check on the appliance
1.
Make sure the door closes and opens easy.
2.
Make sure the control lever moves easy to left and right without undue noise.
3.
Make sure all cast iron plates, the grate and the baffles are in the correct position.
4.
Contact your dealer if the final check shows a defect.
Installation in an existing open fireplace
30
Cuatro-7 75-60
Содержание Cuatro-7 75-60
