barbas Cuatro-7 75-60, Руководство по установке и обслуживанию

Страница: 21 / 76

D
A
E
A
B
C
C
B
B
2
F
1
1
E
F
3
1 Non-flammable spacer
2 Non-flammable insulation plate
3 Flammable or load-bearing wall
Item Dimension
A Air gap 2.5 cm
B Thickness plate 10 cm
C Air gap / Spacer 2.5 cm
D A+B+C 15 cm
E B+C 12.5 cm
F Minimum 3 mm clearance between appliance and surrounding construction
5.3 Clearance to flammable floor (under the appliance)
Put a non-flammable insulation plate with a minimum thickness of 3 cm under the
appliance. To avoid damage to this non-flammable plate, put ceramic or steel tiles
(approx. 10 x 10 cm) under the feet of the appliance.
5.4 Clearances to flammable ceiling
Note:
If a wooden beam is present above the appliance, make sure to protect it
against direct heat radiation. Make sure to put a non-flammable insulation
plate with a thickness of minimum 3 cm between the wooden beam and the
appliance. with an air gap of minimum 1 cm between the insulation plate and
the wooden beam.
Clearances
Cuatro-7 75-60 21