barbas BOX 20 52, Руководство по установке и обслуживанию

Страница: 22 / 36

5.5 Connect the flue gas pipe
Caution:
• During operation of the appliance the outer side of the flue system
becomes hot. Refer to chapter
4.2
for minimum distances to flammable
material.
If the appliance is installed on an unlined, masonry flue with a large diameter, consider
using a flue lining system to improve the performance of the appliance.
1. Connect the flue to the flue gas connection on the appliance. If necessary use a steel
flue adaptor.
2. If a flexible stainless steel flue is used, secure the flue connection with 2 clamps.
3. If the flue is connected to an existing (masonry) chimney, make sure that the gap
between the flue and the existing chimney is sealed, with ceramic wool or any other
applicable component (ask your flue system supplier for advice)
4. Make sure that all mechanical connections of the flue system are correctly used.
5. Make sure that all of the flue system is gas-tight,
5.6 Final check on the appliance
1. Make sure the door closes and opens easy.
2. Make sure the control lever moves easy to left and right without undue noise.
3. Make sure the ceramic plate and the baffles are in the correct position.
Contact your dealer if the final check shows a defect.
Installation
22 Box 20 52