Barazza 1FEVGVC, Инструкция по эксплуатации

Страница: 20 / 76

20
After the water is pumped back to the water
tank, the display will show symbol
requiring the following actions:
•
Remove and empty the water tank.
•
Dry the water tank and introduce it back
into the slot located above the cavity.
Clean and dry the cooking space.
•
Leave the appliance door open so that the
cooking space can cool down and dry
completely.
INFORMATION! It is advisable to remove
the water tank and empty it after a cooking
cycle. This prevents the formation of
bacteria
and limestone inside the
appliance.
If the water tank has not been removed from
the oven and a new cooking cycle is started,
the oven displays the symbol.
General oven functions
Pausing a cooking cycle
You can pause the cooking process at any
time by pressing or opening the door.
The oven incorporates a steam-reduction
function that is activated when the key is
pressed, to gradually release the steam from
the cavity, so that there is less steam to flow
out of the oven when the appliance door is
opened.
WARNING! When opening the door during
or upon completion of the cooking cycle,
be careful of the flow of heat and/or steam
coming out of the cooking chamber. Step
back or to the side to avoid burns. Keep
hands on the oven door until the door is
fully opened to avoid being scalded.
At this point:
•
The steam generation is paused.
•
The cavity walls and the water tank are still
very hot. Danger of burning!
•
The timer stops and the display shows the
remaining operating time (if this has been
set).
If you wish, at this point you can:
1. Turn or stir the food to ensure it will be
evenly cooked.
2. Change the cooking parameters.
To restart the process, close the door and
press the key.
End of a cooking cycle
When cooking process finishes the oven will
ask you the following:
•
Turn the right knob to select an option.
•
Press to confirm.
WARNING! When opening the door during
or upon completion of the cooking cycle,
be careful of the flow of heat and/or steam
coming out of the cooking chamber. Step
back or to the side to avoid burns. Keep
hands on the oven door until the door is
fully opened to avoid being scalded.
The cooling fan can continue to run for a
certain length of time after the appliance has
been switched off. This is a normal function
that is meant to reduce the temperature inside
the oven.
When the display shows the symbol, this
means that the water was pumped and that
the water tank can be removed.
Remove the water tank and dry it thoroughly.
Let the cooking space cool down for a moment
and then clean and dry it with a cloth. The door
should be left open for some time so that the
appliance can dry completely.